Innovative low pass filters
Exxelia has developed several ranges of miniature filters with different low-pass configuration (C, L, Pi, T, 2xPi, 2xL and 2xT) mainly intended to protect electronic equipment from interferences.
Low-pass filter solutions are mainly used for EMI suppression in electronics systems. Exxelia Technologies (ex-Eurofarad), part of Exxelia Group, has developed several ranges of miniature filters with different low-pass configuration (C, L, Pi, T, 2xPi, 2xL and 2xT) mainly intended to protect electronic equipment from interferences.
Exxelia Technologies produces sophisticated filters assembling Exxelia Group’s manufactured ceramic capacitors (X7R/ NPO) with ferrite inductors or winding cores in a shielding case. This solution’s main benefits are performance, reliability and optimal traceability.
Considering a filter in a shielding case implies a good metallic package to insure high shielding performances with attenuation up to 10 GHz. Among options, Exxelia offers glass sealing, steel or kovar package using tin, silver or gold plating treatments to withstand any thermally or mechanically challenged applicaiton.
Exxelia offers innovative EMI suppression filter solutions providing great shielding performance including the FC030 feedthrough mounted on shielding enclosure and FCM030 series designed to prevent EMI on printed circuit board.
FC030 series is feedthrough filter allowing to prevent not only EMI conduction but also EMI radiation on power supply or data signals designs up to 200V. FC030 insertion loss can be 20dB at 1MHz to reach 70dB up to 10 GHz. FC030 series is extremely performant on low frequencies applications.
On the other hand, FC030 can offer very low capacitance values starting from 5pF allowing to protect high bandwidth data signals. Operating temperature from -55C° up to +175C°. FC030 series is ESA qualified.
FCM030 features same design and performances’ as FC030 and is intended for surface mount devices. FCM030 is packaged in full metallic silver plated allowing optimal contact with ground plane that improves the interferences flow to the ground.
The series particularly fit for amplifiers, radars, sensitive HMI, accurate measuring.
New Plug&Play filters for datacenters and mission critical facilities
Electronic equipment can leak sensitive information over conducted or radiated electromagnetic emanations, and signals transmitted down unprotected lines can potentially be intercepted. That’s why filters are implemented into systems to prevent EMI disturbances, as TEMPEST filters stop the high frequency EM signals (or noise) emanating inside the secured environment. Exxelia has a long history of manufacturing state-of-the-art electromagnetic interference (EMI) filtering technologies for space, avionic and defense markets. Thanks to this in-depth knowledge, Exxelia came to the conclusion that the installation of a product is as critical as its reliability, especially when shielding continuity and sensitive copper terminals are involved. That’s where Exxelia’s new full range of TEMPEST pluggable filters will save time and spare headaches! The 9260W series is a multi-socket line extension with a built-in 16A Tempest filter (minimum 60dB, from 100KHz to 1GHz), CE qualified according to EM 60950-1 standard. 9260W series Plug&Play solution is available with UK, US and EU standard plugs and can be provided with any other standard plug upon request. In addition, Exxelia completed its offer with the 9259W series of pluggable filters featuring various plug interfaces such as VGA/DVI, USB, Ethernet, Phone, Audio and much more. 9260W series and 9259W series are both fully compliant with EMC expectations and allow considerable time saving and cost-effectiveness. When a standard filter needs to be wired and shielded to each socket one-by-one before carefully re-closing the whole equipment, Exxelia new series can be installed using no special tools and with a smaller footprint. To all people handling sensitive information, a simple plugging operation is now enough to protect their data. Available now, 9259W and 9260W series are fully customizable upon request.
NEW ENTITY, EXXELIA MAGNETICS
This is an internal merger of two innovative, professional and complementary companies both designer and manufacturer of high-end would magnetic components, which have a history of successfully working together for a year. Exxelia Magnetics will have greater scale, breadth and capabilities to compete more effectively in the global marketplace. Exxelia Microspire Microspire was founded in 1978 and became part of Exxelia Group in 2008. Exxelia Microspire has been designing, developing and manufacturing wound components for over 35 years: transformers and inductors, electro-magnets, rotors and stators. Exxelia Microspire has several manufacturing sites, notably newly located low production cost facilities offering competitive solutions. Exxelia Microspire’s know-how includes standard winding technologies: linear (in RM, ETD, EP, EFD, ER, EQ and other formats) and toroid. For harsh environment applications with shock, vibration, and high temperature issues, Microspire offers innovative specific technologies including SESI, TT and CCM. Exxelia Microspire’s qualified technologies, clearly defined design rules and industrial organization provide the platform on which it is able to offer its customers optimal solutions. Exxelia N'Ergy Exxelia N’Ergy (ex N’Ergy) was acquired in 2015 by Exxelia Group. Exxelia N’Ergy designs and manufactures passive specific electromagnetic components in small and medium range: Transformers, Chokes, Sensors (tachometer, gyros, …), Electromagnets.