Fork me on GitHub

EXXELIA at PCIM 2019

Exxelia will exhibit custom design power transformers and inductors as well as capacitors at PCIM in Nuremberg, Germany, from May 7th to 9th 2019 in booth #136.


Notable at Exxelia’s booth #136 will be custom design power transformers & inductors such as: 

FERRITE TRANSFORMER 100kVA-20kHz

This transformer combines high power up to 100kVA, at very high frequency 20kHz, while still providing a weak leakage inductance. Used in an isolated DC/DC converter, its unique morphology made of U and I 126 magnetic circuit improves considerably thermal dissipation while the litz wire winding reduces high frequency losses. Characterized by a primary circuit at 540V / 350Arms and a secondary winding at 270A, this transformer ensures high performance and maximum leakage current reduction.

3 PHASE INDUCTOR 3x5,5mH-9kHz 

Used in a high performance converter, this three-phase common mode choke withstands the highest current up to 580A thanks to the use of copper bar for winding while ensuring a minimal inductance of 1,4mH and filtering the far-reaching noise. This deisgn is characterized by its extreme reliability thanks to its magnetic circuit made of 24 nanocrystalline tores, chosen to guarantee a stable inductance value across the temperature range -30°C to +140°C.

Published on 18 Apr 2019 by Rebecca Charles

Film capacitor series keeps its cool even at 150°C

The Exxelia Dearborn 880P series of metalised Polyphenylene Sulfide (PPS) Film Capacitors is designed to keep cool when things get hot. With an operating temperature range of -55 to +150°C, they experience no derating for DC operations and none in AC operations up to +125°C. This enables them to function at full capacity in extreme heat applications. The ability to operate at such high temperatures can eliminate the need for a cooling system within the design, thus reducing overall design time, weight and space. PPS is a high-temperature, low-loss dielectric film used in the 880P series of wrap-and-fill capacitors. This allows them to feature superior electrical characteristics over an extremely wide temperature range and maintain excellent capacitance stability in one rugged, lightweight package. It performs consistently well in commercial applications such as in power supplies and in more demanding applications, such as in avionics, on a congested control or instrumentation panel. The series features a capacitance range of 0.0047 to 10.0µF and voltage ratings from 50 to 400VDC with precision tolerances as low as ±¼% through ±10% yielding greater accuracy of capacitance. It is also a customisable unit with voltage maximums of 700 – 800VDC at 125°C maximum (higher voltages are available at reduced capacitance). Made in the USA, the units are highly durable and capable of withstanding a five-pound pull force on lead axis. They are non-polar and demonstrate low loss factor, good voltage breakdown strength and high insulation resistance (low leak current) – and are completely stable over normal temperatures, voltages and frequency ranges. These characteristics allow the 880P series capacitors to deliver high performance in a variety of applications such as DC timing circuits, low- to high-frequency AC applications, and pulse or energy discharge uses. Additionally, the package has axial leads with moisture-resistant, flame-retardant epoxy end seals and an outer tape covering for maximum performance.

This website uses cookies for statistics purposes. By continuing to browse the site you are agreeing to our use of cookies.