AUSA - Booth# 3938
October 8 - 10 : AUSA (The Association of the United States Army’s) Annual Meeting is the largest landpower exposition and professional development forum in North America.
8-10 October, 2018
Walter E. Washington Convention Center
Exxelia at Space Tech Expo – Booth #5009
100% invar tuning screws with self-locking system Invar-36 is a unique Iron-Nickel alloy (64 % Fe / 36 % Ni) sought-after for its very low coefficient of thermal expansion. With 1.1 ppm. K–1 between 0°C and 100°C, Invar-36 is about 17 times more stable than Brass which is the most traditional and common alloy Tuning Elements are made of. The working temperature range in Space is so wide that this property becomes essential for a reliable and stable cavity filter tuning. Self-locking system is a technology commonly used on Tuning Element made of Brass or other soft “easy-to-machine” alloys but is innovative and pretty advanced when applied to hard and tough Invar 36. The design consists of two threaded segments separated by two parallel slots. After cutting both parallel slots, the rotor is compressed in its length in order to create a plastic deformation. Thus, an offset is induced between the two threaded segments which generates a constant tensile stress in the rotor from the moment threaded segments are screwed. High power and high frequency ceramics with the new C48X dielectric Range of high voltage ceramic capacitors based on brand new dielectric material C48X, combining most advantages of NPO and X7R dielectrics. Compared to X7R material, C48X dielectric allows to get the same capacitance values under working voltage with the unrivaled advantage of a very low dissipation factor (less than 5.10–4). Besides, it can also withstand very high dV/dt, up to 10kV/μs, which makes it the solution of choice for pulse and fast charge/discharge applications or firing units. Thus capacitors with C48X dielectric appear to be ideally suited for power applications where heat dissipation may be detrimental to performances and reliability. Magnetic components based on adaptive CCM technology Exxelia designed CCM technology to respond to the growing interest of electronic engineers for inductors and transformers with multiple outputs, high power density and reduced footprint. Qualified for aeronautic and space applications, the CCM product line features terrific robustness. The CCM technology adapts to most every need, even the harshest environments, including VIGON® resistance. The series offers five different sizes, allowing optimized component design in a pick-and-place surface mount (SMD) package. Through-hole (TH) packages are also available upon request. CCM transformers and inductors can operate over a wide temperature range with a minimal temperature of -55° C. The standard thermal grade of the technology is 140° C. The epoxy molding protecting the winding ensures a lower temperature gradient and a better heat dissipation. Each unit is thoroughly tested with a dielectric withstanding strength of 1,500 VAC.
Introducing new EXXELIA.COM
Completely re-designed Exxelia new website features user-friendly design, improved functionalities and enhanced rich content to assist electronic engineers, component purchasers, industry professionals and students to quickly access information. Created with the user experience firmly in mind, the website has been designed to make Exxelia’s vast product portfolio easy to browse. A parametric search engine with filters specific to each product category (capacitance, voltage, temperature, insertion loss, current, frequency, etc.) enables to narrow down the product portfolio and access information in a quick, trouble free and efficient way. More than 680 product series are listed on the website with relevant literature accessible for each series: datasheets, 3D models, high-res pictures and much more. Technical data, application guides, white papers work together to provide a detailed overview of Exxelia’s capabilities across wide range of technologies. An application section presents the major markets the group is involved in, with a dedicated product selection for every sub-environments: avionics & cockpit, actuation systems, satellites, radars, medical imaging, etc. This section also contributes to better present Exxelia’s diversified offer of components that includes capacitors, magnetics, filters and electromechanical solutions. “We are thrilled about the new website launch and the robust information it provides to better understand Exxelia wide product offering. We believe this will improve the overall customer experience and strengthen our brand as a technology leader and quality product manufacturer” said Marie Evrard, Head of Marketing and Communication at Exxelia. “We believe this new site will allow our visitors to have a very informative experience as we increase our market presence. The group continues to grow and it was necessary to streamline our website to make it easier to navigate.” states Jérôme Tabourel, Marketing & Sales VP at Exxelia. Exxelia new website will be updated on a regular basis with new product launches, company info, events and technical information.